Flash Samsung Galaxy S7 Edge (SK Telecom) SM-G935S Nougat 7.0 Tested Firmware
Navigation

Flash Samsung Galaxy S7 Edge (SK Telecom) SM-G935S Nougat 7.0 Tested Firmware

Galaxy S7 Edge (SK Telecom) SM-G935S Nougat 7.0


Mobile : Galaxy S7 Edge (SK Telecom)

Model : SM-G935S

System Version : Nougat 7.0

Baseband : SKC G935SKSU1DQA5



FIRMWARE DOWNLOAD LINK:

ODIN TOOL;

HOW TO FLASH
FELLOW VIDEO BELLOW



How to update Galaxy S7 edge to Android 7.0 Nougat:

  • Unzip Odin on your computer and install it.
  • Unzip firmware zip file in the same folder as Odin.
  • Switch your Samsung Galaxy S7 edge off and boot it in Download mode: press and hold Volume Down and Power together and then press the Home key.
  • Open Odin and connect your smartphone with your computer. When connected successfully, one of the ID:COM boxes will turn yellow with the COM port number after a while. (In case you don’t get it, try another USB port. If that doesn’t help either, then re-install USB drivers).
  • On your Odin, select files:
    • Click on AP and select file with AP in its name.
    • Click on CP and select file with MODEM in its name – ignore if you didn’t get any such file. 
    • Click on CSC and select file with CSC in its name – ignore if you didn’t get any such file.
    • Click on PIT and select the. pit file – ignore if you didn’t get any such file.
    • Click on BL and select file with BL in its name – ignore if there is no such file.
  • Make sure to check Auto Reboot and F.Rest Time. Check Re-Partition only if you selected the. pit file.
  • Click on Start to initiate the update process.
  • When Android 7.0 Nougat update installation is successfully completed, you will get a PASS message.
  • Your smartphone will now reboot. Once you see the home screen, you can disconnect your Samsung Galaxy S7 edge G935F and reboot it.
                                      
Share