MT6580__samsung__SM-N9200__nobleltehk__5.1.1__ALPS.L1.MP6.V2.19_HCT6580.WEG.A.L_P20
Navigation

MT6580__samsung__SM-N9200__nobleltehk__5.1.1__ALPS.L1.MP6.V2.19_HCT6580.WEG.A.L_P20

GALAXY NOTE 5 MT6580 CLONE FIRMWARE


INFO:
Device Brand   : samsung
Device Model   : nobleltehk
Device CPU     : MT6580
Device IntName : nobleltezh
Device Version : 5.1.1
Device Compile : 3/19/2016 8:31:05 AM
Device Project : ALPS.L1.MP6.V2.19_HCT6580.WEG.A.L_P20
Device ExtInfo : SM-N9200

BB_CPU_PID : 6580
Inital Boot Ok!
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Settings for BROM configured!
Processing BROM stage SecCfgVal : 0x00000000
PreLoader : NOT Active [ Erased ]
BromVer : 0x0005 BLVersion : 0x00FE
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
BootLdrSS : NORMAL with SPRELOADER Processing DA stage
NAND Flash : NOT INSTALLED
Sending and initialize DA ... Running DA ver.4.2 on BBID : 0x94
DRAM configured from IDB!
eMMC Flash : 450100445331303038019CE14A5C1347 Initialize Memory ... DRAM initialize passed!
[eMMC] : FLASH_VEN : 0x45 , OEM : 0100
DRAM size : 0x40000000 DAgent sent , init HW now eMMC FlashIC initialized [eMMC] : FLASH_INF : [SANDISK] , 8001S
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_CID : 450100445331303038019CE14A5C1347 [eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000 [eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
Reading Flash Content now ...
DEV RID : 0xB6E6A67CE7E9E6503D87DC68EE0623BF INT RAM : 0x00020000 EXT RAM : 0x40000000 [1 GiB] BOOT TYPE : EMMC_FLASH_BOOT SOC VERIFY : C1 Boot Ok! USBDL : Init HSUSB Ok!
MTKxPRJ : ALPS.L1.MP6.V2.19_HCT6580.WEG.A.L_P20
xGPT : Normalize settings Ok! Brand : samsung ProdName : nobleltezh ProdModel : SM-N9200 Device : nobleltehk AndroidVer: 5.1.1 MTKxCPU : MT6580 [Read Ok] : preloader_hct6580_weg_a_l.bin
[ScatCFG] : MT6580 / V1.1.2 / hct6580_weg_a_l / EMMC
[Read Ok] : lk.bin [Read Ok] : boot.img [Read Ok] : recovery.img [Read Ok] : logo.bin [Read Ok] : secro.img [Read Ok] : system.img [Read Ok] : cache.img [Read Ok] : userdata.img Android Info saved MAUI Meta DB saved
FW Size : 1397 MiB
HWConfig Info saved

PRE-REQUISITE
  • This is for N9200 Clone  only.
  • Your device must have 70% Of battery.
  • You need a Laptop or PC to perform this Action.
  • Download the right firmware for N9200 clone from the link bellow.
  • Make sure you have followed the steps properly. Don’t Skip and Read!
  • We are not responsible for any damage that you make to your Phone.
WHY YOU NEED TO FLASH YOUR PHONE!!
You need this firmware/stock rom if you have encountered this kind of problem in your Smartphone Listed Below:
1.Hang on logo.
2.Rebooting.
3.Bootloop & Dead boot after a wrong software.
4-Virus & Sexual Apps.
5-System crashing


How to know if the phone had a hard problem (Emmc problem)??
  • What is Emmc problem? also called read mode only,  it means that your internal memory doesnt accept command, so the phone stay on the same condition after a software or a hard reset.
  •  if the phone hang on logo after flash, you ara facing Emmc problem.
  • As a precaution you shouldn't change setting in SP flashtool from Download only to format+download, you will end with a dead phone if you have a Emmc problem ofcourse.
DOWNLOAD AREA:
FIRMWARE DOWNLOAD LINK:

SP Flashtool Downloadlink: SPFlashTool 5.1628
Drivers Download Link: Mobile Mtk Drivers

REMARQUE:
MAKE BACKUP BEFORE FLASH


How To Flash Via SP FLASHTOOL?

1-Requirements:
    • A Computer PC Run Windows XP or above
    • Usb data cable (not a generic cable)
    • Mtk usb drivers installed manually, you will find instruction bellow
    • Your Mtk Smartphone Face a soft issue
    • Original stock rom (you can find it above in download section)
    • The latest SP Flashtool version

    2-How to install VCOM Drivers:
    • Open device manager from my PC or my computer.
    • Click on any item and go to actions > Add legacy hardware
    • Now, press next and select install drivers manually
    • Press next and click on have disk
    • from the browse option, select VCOM drivers From mtk drivers folder
    • Once its done. You will see a screen similar to this:




    • Once you are done with the driver installation, go to device manager > Ports (COM&LPT) you will find a device similar to this:



    3-How to flash rom using SP Flashtool?:

    • Power the phone off, remove the battery from the smartphone and put it back without booting the phone (if the battery is inside then simply switch it off).
    • Launch SP Flashtool 

    *Double clicks onFlash_tool.exe
                                           *Press OK






    • Click on scatter-loading option and browse to the scatter file of your stock rom choose MTxxxx_android.txt (scatter.txt).



    • Dont touch any options, Keep the original setting (In case you want to format device before flash press choose format+download but it'snt recommanded because you will be ended with an EMEI null)
    • If you phone is alive and has a software issue (contain virus, Stuck on logo, apps setting problem, blink, or not work as expected) I advise you to Uncheck Preloader as a precaution. On contarary check all pertitions if you have a boot problem (you phone does'nt boot when you try to power on it).
                                   

    • Once you are done with everything, click on the download button at the top of the software.




    Stop should now be prominent while other options should be grayed out

    • Connect your switched off phone with battery inside to PC via Usb cable
    • A progressbar should start running
    • In the end of an success flash process, a box should show up with green OK symbol inside

    • Disconnect the phone, remove the battery, slot it back in then power the phone.
ENJOY.

                                      
Share