FLASH ACER LIQUID E2 V370 MT6589 4.2.1 TESTED FIRMWARE
Navigation

FLASH ACER LIQUID E2 V370 MT6589 4.2.1 TESTED FIRMWARE

GUIDE TO FLASH ACER LIQUID E2 V370 MT6589 4.1.2 kitkat TESTED FIRMWARE FREE DOWNLOAD

FLASH ACER LIQUID E2  V370 MT6589 4.2.1 TESTED FIRMWARE

INFO:
CPU: MT6589(6583) SW:0000 Ver: CA00
Downloading Boot8 ...
EMMC Size: 0x00E9000000
Flash Type: EMMC
INT/EXT RAM Size: 0x0+0x0
Reading infr(EMMC)...
PRELOADER BaseAddr:0x0 Size:0x600000
MBR BaseAddr:0x600000 Size:0x80000
EBR1 BaseAddr:0x680000 Size:0x80000
NODL_PMT BaseAddr:0x700000 Size:0x400000
NODL_PRO_INFO BaseAddr:0xB00000 Size:0x300000
NODL_NVRAM BaseAddr:0xE00000 Size:0x500000
NODL_PROTECT_F BaseAddr:0x1300000 Size:0xA00000
NODL_PROTECT_S BaseAddr:0x1D00000 Size:0xA00000
NODL_SECCFG BaseAddr:0x2700000 Size:0x20000
UBOOT BaseAddr:0x2720000 Size:0x60000
BOOTIMG BaseAddr:0x2780000 Size:0x600000
RECOVERY BaseAddr:0x2D80000 Size:0x600000
SEC_RO BaseAddr:0x3380000 Size:0x600000
NODL_MISC BaseAddr:0x3980000 Size:0x80000
LOGO BaseAddr:0x3A00000 Size:0x300000
EBR2 BaseAddr:0x3D00000 Size:0x80000
NODL_EXPDB BaseAddr:0x3D80000 Size:0xA00000
ANDROID BaseAddr:0x4780000 Size:0x32000000
CACHE BaseAddr:0x36780000 Size:0x7E00000

USRDATA BaseAddr:0x3E580000 Size:0x40000000
NODL_FAT BaseAddr:0x7E580000 Size:0x699A0000
NODL_BMTPOOL BaseAddr:0xFFFF00A8 Size:0x0


Device Brand   : acer
Device Model   : C11
Device CPU     : MT6589
Device IntName : c11_ww_gen1
Device Version : 4.2.1
Device Compile : 06/05/2013 07:16:32 ?
Device Project : Acer_AV061_V370_1.017.00_WW_GEN1
Device ExtInfo : V370


PRE-REQUISITE
  • This is for Liquid E2  only.
  • Your device must have 70% Of battery.
  • You need a Laptop or PC to perform this Action.
  • Download the right firmware for Liquid E2 from the link bellow.
  • Make sure you have followed the steps properly. Don’t Skip and Read!
  • We are not responsible for any damage that you make to your Phone.

WHY YOU NEED TO FLASH YOUR PHONE!!
You need this firmware/stock rom if you have encountered this kind of problem in your Smartphone Listed Below:
1.Hang on logo.
2.Rebooting.
3.Bootloop & Dead boot after a wrong software.
4-Virus & Sexual Apps.
5-System crashing


How to know if the phone had a hard problem (Emmc problem)??
  • What is Emmc problem? also called read mode only,  it means that your internal memory doesnt accept command, so the phone stay on the same condition after a software or a hard reset.
  •  if the phone hang on logo after flash, you ara facing Emmc problem.
  • As a precaution you shouldn't change setting in SP flashtool from Download only to format+download, you will end with a dead phone if you have a Emmc problem ofcourse.


DOWNLOAD AREA:
Password If applicable: www.freemobilefirmware.com


SP Flashtool Downloadlink: SPFlashTool 5.1628
Drivers Download Link: Mobile Mtk Drivers

REMARQUE:
MAKE BACKUP BEFORE FLASH


    How To Flash Via SP FLASHTOOL?
      • A Computer PC Run Windows XP or above
      • Usb data cable (not a generic cable)
      • Mtk usb drivers installed manually, you will find instruction bellow
      • Your Mtk Smartphone Face a soft issue
      • Original stock rom (you can find it above in download section)
      • The latest SP Flashtool version

      2-How to install VCOM Drivers:
      • Open device manager from my PC or my computer.
      • Click on any item and go to actions > Add legacy hardware
      • Now, press next and select install drivers manually
      • Press next and click on have disk
      • from the browse option, select VCOM drivers From mtk drivers folder
      • Once its done. You will see a screen similar to this:




      • Once you are done with the driver installation, go to device manager > Ports (COM&LPT) you will find a device similar to this:



      3-How to flash rom using SP Flashtool?:

      • Power the phone off, remove the battery from the smartphone and put it back without booting the phone (if the battery is inside then simply switch it off).
      • Launch SP Flashtool 

      *Double clicks onFlash_tool.exe
                                             *Press OK






      • Click on scatter-loading option and browse to the scatter file of your stock rom choose MTxxxx_android.txt (scatter.txt).




      • Dont touch any options, Keep the original setting (In case you want to format device before flash press choose format+download but it'snt recommanded because you will be ended with an EMEI null)
      • If you phone is alive and has a software issue (contain virus, Stuck on logo, apps setting problem, blink, or not work as expected) I advise you to Uncheck Preloader as a precaution. On contarary check all pertitions if you have a boot problem (you phone does'nt boot when you try to power on it).
                                     

      • Once you are done with everything, click on the download button at the top of the software.



      Stop should now be prominent while other options should be grayed out


      • Connect your switched off phone with battery inside to PC via Usb cable
      • A progressbar should start running


      • In the end of an success flash process, a box should show up with green OK symbol inside


      • Disconnect the phone, remove the battery, slot it back in then power the phone.

    ENJOY.
                                      
Share